Publisher: Supplier of LED Display Time: 2022-04-12 14:54 Views: 836
Brightness comparison
Put the acrylic board close to the same number of modules and slowly raise the distance by a small distance to see if the brightness of the lamp beads can meet your requirements. Of course, it is more direct to put the module directly in the word. The higher the brightness, the higher the requirements for the lamp beads, and the cost is relatively high. The pure indoor environment can use low brightness, but if it is a window LED transparent screen or an LED glass curtain wall screen, then a bright LED transparent screen is required.
viewing brightness
While watching the brightness, pay attention to whether the light of the lamp bead is uniform, and pay attention to whether there is any chromatic aberration when observing the white light (this is very important) - if you cover it with a thin white paper, you may not be able to observe it, so Use a certain thickness of acrylic. The presence or absence of chromatic aberration is the most important part of distinguishing quality, and it is also one of the main reasons for the price difference of LED transparent screens.
Wire identification
High-quality wire, passed UL certification, these are unreliable through LED transparent screen manufacturers, so the most direct method is to open the outer skin and count the number of wire cores inside! Use 15, 17, 19 cores or even 20, 30 cores The module of the line should be no worse than the module of 14 and 11 cores, and vice versa.
lamp bead temperature
After lighting for a period of time, touch the LED lamp beads with your hand, the temperature is very high or even hot, and the stability is not as good as the low temperature.
Solder joint quality
The fullness of the solder joints proves that the welding process is good, and the high brightness proves that the solder is used well; the serious ones are virtual soldering, which is prone to poor contact and troublesome follow-up maintenance.
LED transparent screen sticker light method
At present, there are two production methods for LED transparent screens, one is positive light emission, and the other is side light emission. Although the transmittance of the side-emitting light is relatively high, the light-emitting lamp beads use the traditional LED display lamp beads. After market testing, the quality is very stable.