Currently there are a number of businesses with LED electronic display screen does not fully understand the LED electronic display screen operation and use of precautions to lead to shorten the life of the LED electronic display screen.

LCF editorial here, analyze the LED electronic display screen operation and use of precautions to ensure that the LED display system is safe and normal operation!

1, switching order:

When turning on the screen: first turn on the screen, then turn on the screen.

Close the screen: first off the screen, then off the computer

(First off the computer does not turn off the display, will cause the screen to appear high brightness, led burned lamp, the consequences are serious.)

2, switch screen interval should be greater than 5 minutes.

3, the computer into the project control software before the screen can be opened and energized.

4, avoid opening the screen in the all-white screen state, because at this time the system has the largest impact current.

5, avoid opening the screen in the runaway state, because this time the system's impact current is the largest.

A computer does not enter the control software and other programs.

B computer is not energized; C control part of the power is not turned on.

C control part of the power is not turned on.

6, the ambient temperature is too high or the heat dissipation conditions are not good, led lighting should pay attention to not open the screen for a long time.

7, LED electronic display body part of a line appears very bright, should pay attention to timely turn off the screen, in this state should not be a long time to open the screen.

8, often the power switch of the display tripped, should promptly check the screen body or replace the power switch.

9, regularly check the firmness of the connection. If loose phenomenon, pay attention to timely adjustment, re-enforcement or update the hanging parts.

10, according to the LED large screen display screen body, control part of the environmental conditions, to avoid insect bites, if necessary, should be placed in rodenticide.