The Rainy Season is Coming, What Should I Do If the LED Display Gets Water?

Publisher: Supplier of LED Display Time: 2018-07-11 Views: 2239

Recently, I always see news on the Internet or on TV that there is another heavy rain in a certain area, and residents need to go boating. The heavy rain not only causes a lot of inconvenience to people's travel, but also may cause some LED display manufacturers' warehouses. Water enters the screen, which causes water to enter the display screen. In view of the uninterrupted occurrence of such phenomena, what measures should the LED display manufacturer take in the face of the water entering the screen? Let's explain the solution to the water entering the LED display. method:  

 
  

First of all, use a fan or other tools to completely dry the water-filled LED display screen at the fastest speed.

 

Secondly, energize and age the completely dried screen. The specific steps are as follows:

 

(1) Adjust the brightness (full white) to 10%, power on and age for 8-12 hours.

(2) Adjust the brightness (full white) to 30%, and power on and age for 12 hours.

(3) Adjust the brightness (full white) to 60%, and age it for 12-24 hours.

(4) Adjust the brightness (full white) to 80%, power on and age for 12-24 hours.

(5) Adjust the brightness (full white) to 100%, and age it for 8-12 hours.

 

After completing the above steps, the LED display screen will basically return to normal, but there are the following precautions in the processing process:

 

1. When it is found that the warehouse has entered the water or the LED display screen has entered the water, it should be dealt with urgently without delaying the time.

2. Organize personnel to dry the LED display screen body that has entered the water.

3. Do not put the LED display screen that has entered the water into the air box, it is easy to suffocate the LED lights.

4. When water enters the warehouse, the air box may be flooded. All air boxes should be exposed to the sun to prevent the water from volatilizing into the LED display screen after packing.

5. Failure to deal with all water-infused LED displays in time may affect the stability of the screen to a greater or lesser extent. During the emergency treatment process, there may be constant dead lights after the screen is powered on, which requires manufacturers Always keep an eye on it.

6. All the LED display screens that enter the water are in the air box. After more than 72 hours, the screen is basically not worth repairing, and it needs to be handled with care.

 

To sum up, in the face of the treatment of the water entering the display screen, the word "as soon as possible" is most needed, and the most effective method is used in the shortest time. The longer the time drags, the greater the loss will be. Therefore, when encountering problems such as water in the warehouse, it is necessary to act immediately.