How to change the LED display word through the U disk? Many friends have such doubts, LCF engineers to explain:

LED display U disk to change the word software software menu has a column, click on the USB download, the setup parameters and content saved to send U disk inside. Change the program directly with the U disk copy the content to get the LED display on the replacement.

The operation process is as follows:

1. Use the software that comes with the LED display to make it on the computer.

2. 
   

2. Then there is an option to download the software to the U disk.

3. Then the U disk to the LED display below the USB interface plugged in.

4. Wait a moment, pull out the U disk is good.

Warm reminder: choose to transmit data via USB interface to modify the content of the LED display, you need to modify the LED display control software. And set the screen reference (this has a relationship with the LED display control card). Then point USB download, download the content to be modified to the U disk. Then connect the U disk to the computer USB port can be. The above is about the LED display u disk to change the word of the method, other methods to change the word: through the computer, cell phone (or remote control). If you are not familiar with changing words, please contact your service provider for technical support.