The most notable features of the environment such as the seaside and the riverside are high humidity, strong wind, strong ultraviolet rays, and easy water entry.

1. Humidity: In the later process, excessive humidity will cause the PCB board, power supply, power cord and other components of the LED display to be easily oxidized and corroded, resulting in failure. Therefore, this requires us to do anti-corrosion treatment on the PCB board when making the LED display, such as three-yellow paint on the surface, etc. The power supply and power cord should use high-quality accessories, and the welding place is the most likely to be corroded. Pay attention to the protection work, especially the frame, which is easy to rust, it is best to do a good job of anti-rust treatment.

2. Wind force: The wind force is too large, and the most direct impact is on the installation project of the LED display screen. Therefore, before installing the display screen, we are required to fully consider the wind force factor when doing a force analysis.

3. Ultraviolet rays: Stronger ultraviolet rays are more likely to cause the aging of the surface of the LED display, thereby reducing its lifespan. The selection of excellent materials when making masks is beneficial to resist the damage caused by ultraviolet rays.

4. Water ingress: Usually, rainwater is mainly considered for waterproofing, and the waterproofing of special environments such as seaside and riverside should be considered more comprehensively, and waterproofing measures should be taken from all directions.

5. Viewing angle: This is a factor that is easily overlooked. In this environment, the viewing angle is usually wider and the audience is wider. When choosing a product, it is necessary to fully consider its main audience to determine the viewing angle of the display screen. Requirements.