Outdoor full-color LED display use, some users may encounter display part of the aging color reddish phenomenon, leading to this phenomenon, what is the reason, is there a solution, can only change the new? Generally speaking, to determine the above problem can start from the following aspects.

 

First of all, check whether the power line is poor contact, if the contact is normal, it may be the internal LED chip problems, if this is the case, you can do a long time on the display aging, and then if the color has been stabilized, then you can use to do the “point by point correction” to repair the color reddish.

Secondly, the power supply is insufficient, this situation can only be to increase the number of power supply or replace the power supply with higher power.

Furthermore, there is another situation is the LED module white balance adjustment is not good. Can be directly through the software to reset the white balance adjustment.

If the above several ways are useless that is the lamp bead problem, generally if the lamp bead problem, through the white balance adjustment can be found.