LED electronic display if the use of the environment is in the outdoors, it will face many aspects of the challenge. LED display will be affected by high temperature, cold wave, wind, rain and other bad weather, do not do a good job in these areas, the display of the safe operation of the display will be no way to talk about. Today LCF editorial to tell you how to install the LED electronic display will not leak.

      First, add the back plate to play sealant: there are a lot of friends in order to save trouble, installed outdoor LED display when not add the back plate or back plate does not play sealant, so that after a long time, the electronic components will certainly enter the water, and over time the LED display will be a problem. The electronic components are most afraid of water, water once into the line, will certainly trigger the line burned, these handy to solve the problem must not be ignored.

      Second, play water leakage port: if the LED electronic display and backplane close combination, the following must play water leakage port; the so-called water leakage port is used to leak water. Regardless of the LED display front and back of the combination of how close, over the years, inside or more or less water, if there is no water leakage hole under the mouth, over time the water will accumulate more and more, if you hit the water leakage hole, the water will flow away, so that can play a very good waterproof role in prolonging the service life of the LED display is also beneficial.

Third, the appropriate line: the installation of LED electronic display, plug wiring must choose the appropriate wire, generally abide by the principle of rather big than small, that is, calculate the total wattage of the LED display, choose a slightly larger wire, it is best not to choose just right or too small wire, which can easily cause the line to burn, thus affecting the safe operation of the LED display.

The above is LCF editorial to summarize how to install the LED display in order not to leak the method, I hope to give the majority of friends in the installation of the display to do a reference.