Do outdoor LED displays need to be cleaned? There is no doubt that the answer is yes. Outdoor LED display after a period of time, there will be dust, impurities, dirt and so on attached to the display screen body, if not cleaned, will have an adverse effect on the normal operation of the LED display, in serious cases, can even lead to the destruction of the display. Therefore, outdoor LED display needs to be cleaned regularly to ensure that the LED display effect.

LED display cleaning is high-altitude operation, need to be equipped with professional cleaning team. Cleaning operations using high-altitude rope way (commonly known as the spider) or picking crane ship, with professional cleaning equipment, cleaning personnel according to the screen on different dirt choose different cleaning agents targeted cleaning, so as to ensure that no damage to the LED lamps and mask under the premise of completing the outdoor LED display cleaning work.

LED display cleaning is to remove the accumulation of dust and impurities, cleaning display matters to be noted:

First of all, we should consider buying a better quality cleaning kit, the cost of cleaning solution generally includes electrolyte, high purity distilled water, anti-static liquid, etc., can effectively clean the LED display on the dust and other dirt marks.

Second, there are some friends just think that water can also be, and will not affect the outdoor LED display. However, the cleaning effect of water is relatively poor, and after cleaning the dust will attach again. At the same time need to pay attention to one point is, never spray water on the screen, but to spray a little cleaning fluid on the cleaning cloth, and then gently wipe in the same direction, and before cleaning, need to pull out the power cord.

Outdoor LED display cleaning and maintenance is divided into three steps:

the first step: vacuuming. First suction to remove the dirt and dust on the surface of the LED display mask;

Step 2: wet wash. Use water spray and steam humidification jet display mask, with a vacuum cleaner on the soft bristle brush on the lamp mask for scrubbing, the dirt clean; 

Step 3: drying. Use the vacuum cleaner to dry the water beads and water marks left after wet washing to ensure that the display mask is neat and dust-free.

LCF small warm tips: outdoor LED display need frequent maintenance in order to play the best display effect.