Seven common sense of the use of LED display

Publisher: Supplier of LED Display Time: 2017-08-12 Views: 2534

With the continuous development of the economy and society, the application of LED display is more and more extensive, whether you walk in the streets and alleys, or in the lively urban plaza, high-grade entertainment venues can see the figure of LED display.


In the LED display widely used today, do you know the seven common sense of the use of LED display? The following LCF editorial and we talk about how to correctly use the LED display.


新闻封面9.jpg


First, LED display line, switch check, keep the switch dry, to avoid leakage, electric shock accident.


Second, you can use air conditioning on the LED display dehumidification, placing desiccant and physical hygroscopic approach to keep dry and prevent the display from moisture.


Third, the rainy season, LED screen display to ensure that at least one week to use more than once, each time at least light up more than 2 hours.


Fourth, LED display moderate ventilation, can let the water vapor attached to the display quickly evaporate, reduce the humidity of the indoor environment. But it should be noted that: avoid ventilation in some windless and humid weather, this will aggravate the indoor humidity.


Fifth, outdoor LED display using complex environment, there will inevitably be the phenomenon of water seepage. In addition to the above measures to deal with, usually need to regularly check the box waterproof rubber ring whether there is aging, deformation, mutilation; Seal box screws or locks are easy to loosen and pressure is not enough.


Six, leasing indoor LED display screen in outdoor use, encounter rainy days must immediately power off, no rush to dismantle the screen, if you use a good rainproof cloth prepared in advance to quickly cover, to be sunny day to take the box out to dry. If you encounter persistent rain, you have to open the back cover of the box, use the fan to open the cold air to blow dry. Then dry it in a ventilated and dry room for more than 8 hours. Reduce the brightness of the display and ensure that the screen is lit for more than 4 hours, the electronic components in the moisture fully emitted.


Seven, if the LED display is not in use for a long time, should be frequently energized maintenance debugging, whether it is indoor LED display or outdoor LED display, long time not in use, and then start is likely to appear dead and blind spot. So it is very necessary to frequently energize and light up the screen body debugging.


Master the above seven use of common sense, so that the LED display to play out its maximum performance, to create a broader space for the development of enterprises!