How to see the model number of full color LED display? Sometimes you need to quickly determine the display model number, what are the solutions, here is the experience shared by LCF：

1. viewing distance to determine the LED full color display model. For example, standing within 16 meters, the LED screen looks more fuzzy and unclear, and at about 16 meters, the effect is still relatively normal, so the minimum viewing distance of this screen is about 16 meters, based on the formula: the minimum viewing distance = point spacing, resulting in a point spacing of about 16mm, so the model is P16, but for experienced people, this method is more applicable.

2. 
   

2. Through the point spacing to know the LED display model. Directly observe the distance between two LED beads horizontally or vertically. We know that P10 full-color LED display point spacing is 10mm, P6 full-color display point spacing is 6mm. if the naked eye to observe the distance between the lamp beads 5mm, you can conclude that this display is P5 model. If you are not sure, in the conditions allow, directly take the ruler to measure the distance between the lamp beads, such as measurement results for 8mm, you can determine the LED display model P8.

In addition, you can also understand through the LED display manufacturers there, there is a unit board above the model number is labeled. The two methods described above are summarized by LCF, if not correct, welcome to correct the exchange.