1. On-site inspection

Generally speaking, before the outdoor LED display is installed, the environment should be inspected on the spot, such as topography, luminous radiation range, brightness acceptance and other parameters in a comprehensive test, in order to ensure the smooth display of the display. Installation. Before lifting and installing, the commander must be trained in the implementation of a lifting scheme, so as to better ensure the normal and stable operation of this equipment. It is a different matter under different circumstances, so that a more appropriate approach can be adopted.

　　 2. Display construction equipment

　　According to the results of the site visit, the implementation plan was determined, and then the LED display screen had to be built. When building these outdoor LED displays, they must distinguish between wall advertising displays, hanging advertising displays, and rooftop advertising displays. In the actual installation of the display screen, according to the height and distance of the display screen, a crane and a hoist should be used for lifting in sections, and at the same time ensure that the personnel above cooperate with each other and the life safety of the personnel. For this kind of high-altitude operation LED advertising screen, there is a Better installation and use process. Therefore, during the construction process, safety and refined operation are the top priorities required by Lianchengfa.

　　 3. LED display installation

Due to the different radiation range, the viewing angle of the LED display will be different. It is necessary to install the outdoor LED display according to the field acceptance ability and the usual viewing angle range to ensure that it can be seen from a distance at any angle. See the brightness balance, clean images, subtitle information, large viewing angle and proper brightness are optimized.

　    4.Display screen debugging

Finally, it involves the debugging of an LED display, which is related to subsequent testing. It also includes many areas, such as LED display waterproofing, heat dissipation, rain-shielding range, heat dissipation, power supply, etc., these product structures constitute the entire stability Good graphic outdoor LED display. Of course, the later technical maintenance is also very important. We must manage and maintain these parts well. If the products are not bright and rusty or unstable, they must be replaced in time to ensure better safe use.