Shenzhen Lianchengfa Technology Co., Ltd.

In the face of heavy rain, we must protect ourselves to avoid injury. So in the summer with frequent rainstorms, what kind of protection work should the LED display do to resist the madness of the rainstorm? Let Liancheng send the editor to share with you.

All LED displays, whether indoors or outdoors, have a fixed working humidity range. The industry standard is usually 10%-60% relative temperature. Liancheng Lighting strictly controls the product quality. The working humidity of outdoor LED displays can be adjusted. Up to 95% resistant to extreme humidity. When the relative temperature approaches or exceeds the working humidity standard of the display, it is necessary to dehumidify the screen, or check the power failure.

NO.2 high protection

Since the outdoor LED display is used in the open air, unlike the indoor display, which is a "flower in the greenhouse", it is bound to be threatened by strong storms, etc. Therefore, the protection level of the outdoor LED display must be IP6IP5 and above to face it calmly. The "baptism" of the rainstorm.

NO.3 High temperature heat dissipation

The sealed installation of Liancheng LED outdoor LED display can help the display reduce the risk of water ingress. Secondly, regularly clean the dust attached to the inside and outside of the display, which can also help the display to dissipate heat better and reduce the adhesion of water vapor.

How does the installed LED display deal with the situation that the LED enters the water?

01 Use a fan or other tools at the fastest speed to completely dry the water-filled LED display screen

2. Power on and age the completely dried screen. The specific steps are as follows:

a. Adjust the brightness (full white) to 10%, power on and age for 8-12 hours:

b. Adjust the brightness (full white) to 30%, power on and age for 12 hours;

c. Adjust the brightness (full white) to 60%, power on and age for 12-24 hours:

d. Adjust the brightness (full white) to 80%, power on and age for 12-24 hours

e. Adjust the brightness (full white) to 100%, power on and age for 8-12 hours

After completing the above steps, the LED display screen will basically return to normal: but you also need to pay attention to the following points during the processing:

01 Do not put the LED display screen that has entered the water into the air box, it is easy to suffocate the LED lights:

02. When the warehouse is filled with water, the air box may be flooded with water. All air boxes should be exposed to the sun to prevent the water from volatilizing into the LED display after packing:

03 The failure of timely treatment of all water-related LED displays may affect the stability of the screen to a greater or lesser extent. During the emergency treatment process, the screen may continue to die after the screen is powered on;

04. All the LED display screens that enter the water are in the air box. After more than 72 hours, the screen body basically has no repair value, please handle it with caution.