Shenzhen Lianchengfa Technology Co., Ltd.

As a new type of stage display equipment, LED floor tile screen is widely used in theme parks such as hotels, bars, weddings, and large-scale concerts. Heat conduction and heat dissipation, with new digital technology as the core, using microcomputer full digital processing, advanced circuit protection equipment, widely used in buildings, curtain walls, residential areas, commercial plazas, bridges, highways and other architectural lighting; cultural landscapes, gardens, Landscape decoration and lighting such as tourist attractions; commercial lighting lighting for bars, KTV, etc., product launches, T-stage catwalks, stage performances, evening parties, concert decoration, advertising, media decoration, etc.

If you use an outdoor LED floor tile screen, you will face many challenges. The LED floor tile screen will be affected by severe weather such as high temperature, cold wave, strong wind, rain, etc. If these tasks are not done well, the safe operation of the LED floor tile screen cannot be guaranteed. Today, the editor of Liancheng will introduce to you how to install LED floor tile screen so as not to leak water.

1. Introduction to the characteristics of LED floor tile screen

(1) Strong PC mask, no need to add tempered glass on the surface of the box, good light transmission, point-to-point support design of the module, which can be directly stepped on;

(2) High-strength load-bearing performance: the load-bearing capacity exceeds 2000KG/square meter;

(3) Waterproof, explosion-proof and low-temperature resistance: a single module is independently waterproof and can be used in all outdoor cold climates;

(4) Interaction effect: multi-touch function, no need for external interactive device, realize human-computer interaction;

(5) Quick maintenance: simple disassembly and assembly, easy maintenance;

(6) Flexible shape design: it can be spliced at will, and it can be flexibly applied in various forms.

2. the common interactive mode of LED floor tile screen

(1) The world of flowers: any flower pattern can be customized;

(2) Sky balloon: 3D content can be customized arbitrarily;

(3) Stadium: LED floor tile screen simulates the stadium environment;

(4) Starlight stage: LED floor tile screen simulates starlight stage;

(5) Booth planning and cultural display customization.

3.LED floor tile screen waterproof measures

Some products are not filled with glue or coated without sealant when they are installed outdoors. After a long time, the electronic components will definitely enter the water, and the screen will have problems after a long time. And what electronic components are most afraid of is water. Once water enters the circuit, it will inevitably cause the circuit to burn out. These problems cannot be ignored.

When installing the LED floor tile screen outdoors, the PCB board needs to be coated and glued, and the screw holes around the module and the back of the module are sealed with plugging glue, plus special outdoor cabinets and structures. Heat dissipation, and adopts a special outdoor box structure, it is recommended to be above 40 cm on the ground, which is conducive to rainwater drainage.

Xiao Bian suggested that you can consider buying LED floor tile screens from Lianchengfa, a manufacturer with a relatively early establishment and relatively strong strength, mainly because the product quality of large manufacturers is guaranteed, and the general waterproofing and other protection technologies are relatively mature.